Before you can collect data for a test, stations for the offsite facility must be registered. Once the test begins you can monitor the stations via the Serving Console. You should receive two URLs from the project manager, one for registering stations and one for accessing the Serving Console. You'll need to copy the registration URL to each station.

If you have problems activating an offsite station in your browser, clear browser cookies and site data, and ensure the browser has allow sites to save data on your devise and cookies enabled. Also, if browser cookies and site data are cleared for any reason, you will need to reactivate the offsite station.


See the following:


SEE ALSO – RedJade Minimum Requirements for details on supported browsers, and Create an Offsite Test for a Non-RedJade Member Facility for more information on creating an offsite test.



Register Stations for an Offsite Facility


To register stations for an offsite facility:

  1. From a computer that will be used to collect data, enter the Station Registration URL in the web browser address bar and go to the link. The registration page opens.



  2. Enter a unique name for the station, then click on [Activate this station]. It's best to name all stations sequentially, such as Booth 1, Booth 2, etc.



    The station is registered.



  3. Click on [Finished].



  4. The page displays "No Event Scheduled" until the test is launched. Once the test has launched, click on Try Again?.


  5. Repeat these steps for each computer to be used for data collection.



Monitor Stations for an Offsite Facility


To monitor stations for an offsite facility:

  1. Enter the Serving Console URL in the web browser address bar and go to the link. The Serving Console displays all registered stations.

    During an active test, use the mouse cursor and hover over the booth tile. The tile flips to reveal additional options. See Abandon Booth and Skip Sample for further details.